18
Chapter 2
System Operation
Figure 8 - Save/Recall Screen
The Save and Recall functions are used to store and retrieve 8000 setup
configurations for future use. For example, a specific test setup may be saved for
later use, and then another setup may be used presently. Then, when the user desires
to perform the specific test, its setup is simply recalled.
Non-volatile memory is used for saving the instrument parameters. When a save
operation is performed, all of the parameters which are currently in effect on the
8000 are stored. The user selects a "bin" number for saving the parameters. Then,
when that "bin" number is recalled, the 8000 is restarted and the parameters are
reconfigured to the previously stored values.
A special "bin 0" is reserved for the reset state. Recalling bin 0 will reset all modules
in the system to factory defaults.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com