Checking Latch Alignment - MacDon Draper D65 Installation Instructions Manual

3.9 Checking Latch Alignment

To check the axle latch alignment, follow these steps:
1. Move the swing axle (A) to field position.
2. Check alignment of latching system. Swing axle (A) should
freely engage latch (B) on fixed axle (C). If it does, skip the
remaining steps. If realignment is necessary, continue
through this procedure.
3. Loosen latch bolts (A) (four per axle) to allow parts to
adjust position for best fit.
4. Loosen latch bolts (A) (four per axle) to allow parts to
adjust position for best fit.
5. Latch axles together in field position.
169784
INSTALLATION INSTRUCTIONS
Figure 3.54: Rear Fixed and Swing Axles
Figure 3.55: Rear Swing Axle
Figure 3.56: Rear Fixed Axle
39
C
B
A
A
A
A
A
A
A
Revision H