Nortel 1000E Upgrade page 22

Page 22 of 228
CP PM Signaling Server
Media Gateway Controller Card (MGC)
NN43041-465 Standard 01.04
• Security device
Note: When populated with different memory and disk drive options,
the CP PM hardware can be used as a platform for the CS 1000 Signaling
Server.
The CP PM hardware can be used as a platform for the CS 1000 Signaling
Server. For more information see Signaling Server: Installation and
Commissioning (NN43001-312).
Note: The CS 1000E system supports CP PM, IBM X306m, HP DL320-
G4 and Nortel ISP1100 Signaling Servers running on the same system.
The total number of Signaling Servers required depends on capacity and
survivability levels.
Note: Depending on the upgrade, the NTDW60BA MGC should replace
the Small System Controller (SSC) in the CPU card position (card 0) as
well as the SSC as media gateway in the expansion cabinets of the
MG 1000E. This statement applies strictly to CP PM Call Servers;
CP PII and CP PIV can have an SSC as the IPMG controller.
The CS 1000 Release 5.0 MGC features include:
• Signaling and switching
• Conference and Tones
• Three remote SDI ports (NTDK48K)
• RMD slot
• Six external ethernet switch ports
• MGC 100BT Adapter (NTDW63AAE5)—Cabinets only
July 2007