Nortel 1000E Upgrade page 127

Figure 53
Selected J2-J5 plate on back panel of UEM
8
See Figure 54 and Figure 55.
Communication Server 1000E Upgrade
Establish an ELAN port on the back panel of the UEM.
a. Insert the end of one of the RJ-45 CAT5 Ethernet patch cables
(supplied) into the ELAN network interface (ELAN port) on the
faceplate of the server.
b. Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c. Plug the other end of the Ethernet patch cable into one of the
Ethernet port couplers mounted in the Ethernet port adapter plate.
d. Label the Ethernet port coupler as ELAN.
Option 11C Chassis to Communication Server 1000E
Installing a Signaling Server Page 127 of 228