Nortel 1000E Upgrade page 135

Figure 61
Nortel ISP1100 Support bracket
Communication Server 1000E Upgrade
Procedure 14
Preparing an ISP1100 Signaling Server for rack-mounting
Note: The Front Mount Bracket assembly is not intended for use as a
slide rail system. The ISP1100 Signaling Server must be firmly attached
to the rack.
WARNING
The load rating for this mounting kit is 50 pounds. If you
exceed this limit, damage or injury can occur.
1 Make sure the Nortel ISP1100 server is not plugged in to an electrical
outlet.
2 Align the end of the rail with the flange (B) toward the rear of the ISP1100
Signaling Server. See Figure 61.
Installing a Signaling Server
Option 11C Chassis to Communication Server 1000E
Page 135 of 228