To Lower The Switch Box On The Indoor Unit - Daikin Altherma 3 R F Installer's Reference Manual

6 | Unit installation

6.2.5 To lower the switch box on the indoor unit

Installer reference guide
56
2×
T25
5 If you need access to the high voltage components, remove the high voltage
switch box cover.
During the installation, you will need access to the inside of the indoor unit. To
have easier front access, put the switch box lower on the unit as follows:
Prerequisite: The upper front panel and front panel have been removed.
1 Remove the fixing plate at the top of the unit.
2 Tilt the switch box to the front and lift it out of its hinges.
1
4×
T25
2×
T25
ERLA03DAV3 + EHFH03S18DJ3V
Daikin Altherma 3 R F
4P596806-1 – 2019.10