Daikin Altherma 3 R F Installer's Reference Manual page 203

Field settings table
Breadcrumb Field code Setting name
A.8 [D-01] Contact type of preferential kWh rate PS installation?
A.8 [D-02] Which type of DHW pump is installed?
A.8 [D-03] Leaving water temperature compensation around 0°C.
A.8 [D-04] Is a demand PCB connected?
A.8 [D-05] Is the pump allowed to run if prefer. kWh rate PS is cut?
A.8 [D-07] Is a solar kit connected?
A.8 [D-08] Is an external kWh meter used for power measurement?
A.8 [D-09] Is an external kWh meter used for power measurement?
A.8 [D-0A] --
A.8 [D-0B] --
A.8 [D-0C] --
A.8 [D-0D] --
A.8 [D-0E] --
A.8 [E-00] Which type of unit is installed?
A.8 [E-01] Which type of compressor is installed?
A.8 [E-02] What is the indoor unit software type?
A.8 [E-03] --
A.8 [E-04] Is the power saving function available on the outdoor unit?
A.8 [E-05] Can the system prepare domestic hot water?
A.8 [E-06] Is a DHW tank installed in the system?
A.8 [E-07] What kind of DHW tank is installed?
A.8 [E-08] Power saving function for outdoor unit.
A.8 [E-09] --
A.8 [E-0A] --
A.8 [E-0B] --
A.8 [E-0C] --
A.8 [E-0D] Is the system filled with glycol?
A.8 [E-0E] --
A.8 [F-00] Pump operation allowed outside range.
A.8 [F-01] Above which outdoor temperature is cooling allowed?
A.8 [F-02] --
A.8 [F-03] --
A.8 [F-04] --
A.8 [F-05] --
A.8 [F-09] Pump operation during flow abnormality.
A.8 [F-0A] --
A.8 [F-0B] Close shut-off valve during thermo OFF?
A.8 F-0C Close shut-off valve during cooling?
A.8 [F-0D] What is the pump operation mode?
(*1) EHFH03S18DJ3V + EKHVCONV3_
(*2) EHFH03S18DJ3V
Range, step
Default value
R/W 0: No
1: Active open
2: Active closed
3: Safety thermostat
R/W 0: No
1: Secondary rtrn
2: Disinf. Shunt
R/W 0: No
1: increase 2°C, span 4°C
2: increase 4°C, span 4°C
3: increase 2°C, span 8°C
4: increase 4°C, span 8°C
R/W 0: No
1: Pwr consmp ctrl
R/W 0: Forced off
1: As normal
R/W
0: No
1: Yes
R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
0
2
0
0
0
R/O 0~5
0: LT split
R/O 0
R/W (*1)
0: Reversible (*1)
R/O (*2)
1: Heating only (*2)
R/O 2
R/O 0: No
1: Yes
R/O 0~1
1: Yes
R/O 0~1
1: Yes
R/O 0~6
1: Integrated
R/O 0~1
1: Enabled
1
0
0
0
R/W
0: No
1: Yes
0
R/W 0: Disabled
R/W 10~35°C, step: 1°C
20°C
3
5
0
0
R/W
0: Disabled
1: Enabled
0
R/W 0: No
1: Yes
R/W 0: No
1: Yes
R/W 0: Continuous
1: Sample
2: Request
7/7
Installer setting at variance with
default value
Date Value
4P596814-1 - 2019.10