Finishing The Outdoor Unit Installation; To Finish The Outdoor Unit Installation - Daikin Altherma 3 R F Installer's Reference Manual

6 | Unit installation

6.5 Finishing the outdoor unit installation

6.5.1 To finish the outdoor unit installation

Installer reference guide
62
Option 1: Through the left side panel
3×
T25
1
Option 2: Through the right side panel
DANGER: RISK OF ELECTROCUTION
▪
Make sure that the system is earthed properly.
▪
Turn off the power supply before servicing.
▪
Install the service cover before turning on the power supply.
NOTICE
It is recommended that the refrigerant piping between indoor and outdoor unit is
installed in a ducting or the refrigerant piping is wrapped with finishing tape.
1 Insulate and fix the refrigerant piping and cables as follows:
1
3×
T25
ERLA03DAV3 + EHFH03S18DJ3V
Daikin Altherma 3 R F
4P596806-1 – 2019.10