Making A Message Call - Codan Envoy Getting Started Manual

O
PERATING THE TRANSCEIVER
C
ALLING
1

Making a Message call

If you want to send a text message to another station, make a
Message call.
You can:
•
•
•
To make a Message call:
1
54
If prompted, press
want to use, then press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate
that the call has been successful.
NOTE: If Settings > Calling > General > LBT
Mode is set to Enabled or Override
allowed, you may be asked to make the call
again if the channel is occupied.
enter a message at the time that you make a call
store up to 10 messages in User Data > Messages for
later use
store messages in a contact as part of a pre-programmed
Message call
Press CALL.
NOTE:
You may be prompted to register a self
address on this control point for the HF
network that you are using to make the call.
The call type and address of the last call are shown at the top
of the call screen. The filtered Call Log below this shows the
latest instance of any call type made to or received from a
particular address.
E
or to scroll to the channel that you
® T
NVOY RANSCEIVER
G S G
ETTING TARTED UIDE