Entering A Special Character (2220/2230) - Codan Envoy Getting Started Manual

Entering a special character (2220/2230)

E ® T
NVOY RANSCEIVER
Do any of the following:
1
• Press
which you want to enter text.
• Press
the cursor.
• Hold
• Press the key on the keypad that corresponds to the
letter that you want to enter.
For example, if you want to enter the letter E, press 3
twice.
After a brief pause, the cursor moves to the next
space, ready to enter another character.
NOTE:
Press to move to the next entry.
1
Related links:
Entering text with the 2221 Handset on page 158
You can enter special characters in messages, names, contacts, and
in addresses of stations that you call.
NOTE: If the FED-STD-1045 ALE/CALM option or
MIL-STD-188-141B ALE option is installed in your
transceiver, the
global ALL address syntax (@?@) or special ALE
addressing characters easily.
To enter a special character in an address, message or contact:
Press or
1
want to insert a special character.
G S G
ETTING TARTED
N
or to move the cursor to the point at
(on SCAN key) to delete text to the left of
to delete the whole entry.
If you are in a letter-entry mode and
want to enter a number, hold the key
corresponding to the number that you
want to enter.
key may be used to enter the
to move the cursor to the point where you
UIDE
AVIGATING THE MENU STRUCTURE
E
NTERING TEXT IN A FIELD
157