Adding A Simple Call - Codan Envoy Getting Started Manual

Adding a simple call

E ® T
NVOY RANSCEIVER
To add a contact:
Enter the name that you want to use for the contact, then
1
press (Add Call).
The HF Network entry is highlighted.
The HF network defines the call system and self address that
is used by your station when the call is made.
Press or
1
to move to the Call Type entry.
Press
1
Press or
1
NOTE:
If you are adding:
1
• a Selective, Channel Test, Emergency, Get Position
or Send Position call, continue from
call on page 23
• a Message call, continue from
call on page 24
• a Phone call, continue from
page 26
Related links:
Contacts on page 129
A simple call is a call that requires an address only at this stage of
the definition process.
To continue with adding a Selective, Channel Test, Emergency,
Get Position or Send Position call:
to move to the Address | Selcall Address |
Press
1
ALE Address entry.
G S G
ETTING TARTED
to select the HF network that you want to use.
to select the call type that you want to use.
The call type that you select affects
information that you can enter for the
remainder of this call.
UIDE
U
SING THE WIZARD
U
SING THE WIZARD
Adding a simple
Adding a Message
Adding a Phone call on
23