Selecting A Channel - Codan Envoy Getting Started Manual

Selecting a channel

E ® T
NVOY RANSCEIVER
To select a channel:
Press PTT to exit to the channel or scanning screen.
1
If the transceiver is scanning, press SCAN to switch off
1
scanning.
Press or
1
The channel is selected.
NOTE:
NOTE:
Do any of the following:
1
• Hold OK to edit the channel, if permitted.
• Press OK to search for a channel.
• Press CALL to start a call.
Hold CALL to go to Contacts.
•
G S G
ETTING TARTED
to scroll to the channel that you want to use.
If you want to change the sideband, press
MODE. If the mode does not change, there is
only one mode for the channel.
If you have an automatic antenna tuner fitted,
press PTT to tune the antenna to the currently
selected channel.
UIDE
O
PERATING THE TRANSCEIVER
S
ELECTING A CHANNEL
35