Codan Envoy Getting Started Manual page 101

E ® T
NVOY RANSCEIVER
Do one of the following:
1
• If you want to make the call using a specific channel,
switch off scanning on the transceiver's control
point, then scroll to the channel that you want to use
for the call.
• If you want to make the call using an ALE/CALM
HF network, switch on scanning on the transceiver's
control point.
NOTE:
In UUPlus©/Codan Chat©, press Send.
1
NOTE:
Viewing the performance of the 2.4 kbit/s Data Modem
You can set one of the status areas to show the link status and
throughput of the internal data modem.
To view the performance of the modem:
Go to the channel screen.
1
Use the information in
1
2.4 kbit/s Data Modem.
G S G
ETTING TARTED
If a channel is common to both HF networks,
the type of HF network used for the call is
determined by the scanning status when the
call is made.
If you are already in an existing Selcall or
ALE/CALM link, you will be asked to
confirm if you want to override the lock on
the system from the existing link.
Table 6 to determine the status of the
UIDE
O
PERATING THE TRANSCEIVER
D
ATA OPTIONS
89