Figure 10: Incoming Call Pop-Up - Codan Envoy Getting Started Manual

E ® T
NVOY RANSCEIVER
To answer an incoming call:
Listen for an incoming call tone.
1
An incoming call pop-up shows information on the type of
call, the address of the caller, the time of the call, and the
channel used.

Figure 10: Incoming call pop-up

After the period set in Settings > Calling > General > In
Call Timeout has lapsed in the transceiver, the incoming
call pop-up changes to the missed call pop-up.
NOTE:
If you are receiving a Selective or Emergency call, answer
1
the call by holding PTT and speaking side-on across the
microphone in the handset, or directly into the microphone
on the desk console.
If you are receiving a Phone call, press PTT to accept the
1
call, then release PTT.
An automatic voice message is played that asks you to wait
while the connection is made. Do not speak during this time.
G S G
ETTING TARTED
Depending on the setup of the HF network
used for the call and the digital voice and/or
encryption options installed in the
transceiver, the transceiver may switch
automatically between analogue/digital voice
and/or clear/secure signals.
UIDE
O
PERATING THE TRANSCEIVER
C
ALLING
59