Selecting A Channel - Codan NGT AR Getting Started Manual

Getting started

Selecting a channel

12
To select a channel:
1
Press VIEW until the channel screen is displayed.
If scanning is on, press SCAN to switch it off.
1
Scroll through the channels in the list. Stop scrolling
when the channel you want is displayed.
The channel is selected.
1
If you want to change the sideband or IF filter settings,
press MODE.
If the mode does not change, there is only one mode for
the channel.
NOTE
If you have an automatic antenna fitted,
press PTT to tune the antenna to the
currently selected channel.
NGT Transceiver Getting Started Guide