Code 128; Enable / Disable Code 128 - Inateck P6 User Manual

3.3. Code 128

3.3.1. Enable / Disable Code 128

Decide whether to enable Code 128. Inateck P6 Scanner defaults "Enable Code 128".
(*) Enable Code 128 Disable Code 128
Enter Setup Exit with Save
Exit without Save
Note: Read the "Disable Code 128" barcode will make the scanner unable to read Code
128 barcode. Thus, if the scanner cannot read the Code 128 barcode, please try to scan
"Enable Code 128" to reset.
For Example: Steps to enable Code 128 are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 128" barcode;
3. Read the "Exit with Save" barcode.
34