Select Output Interface; Bt Spp Mode; Bt Hid Mode - Inateck BCST-10 Instruction Manual

2.1. Select Output Interface

Either SPP or HID can be chosen depending on the need.

2.1.1 BT SPP Mode

If you select the output interface of BT SPP, you may run
HyperTerminal.exe or serial port tool to collect the scanned data.
Enable SPP
You can setup SPP data batch upload or single upload according to
your requirements.
SPP Data Batch Upload
SPP Data Single Upload

2.1.2 BT HID Mode

By default, BT HID is activated on the BCST-10 Scanner, and the
keyboard type is set to PCAT (US).
Enter Setup
(*)Enable HID
Exit with Save
Exit without Save
24