1St Mirror Removal - Ricoh Robin Service Manual

OPTICS

2.2 1ST MIRROR REMOVAL

1. Turn off the main switch.
2. Remove the exposure glass. (See Exposure Glass Removal.)
3. Move the first scanner to the cutout position (150 mm from the left scale).
4. Move the 1st scanner to the front side. Then, while holding the scanner,
press up on the rear spring plate [A] with a finger and remove the plate
with a pair of pliers. Leave the front spring plate [B] in position in the rear
side plate cutout.
5. Carefully slide the 1st mirror [C] toward the front of the machine and lift
the mirror out of the machine rear side first.
[A]
5-6
24 June 1994
[B]
[C]