Lens Drive Motor Replacement - Ricoh Robin Service Manual

OPTICS
2.9 LENS DRIVE MOTOR REPLACEMENT (A152 Copier
only)
[C]
[A]
1. Turn off the main switch.
2. Remove the exposure glass and the lens cover.
3. Remove the tension spring [A] and the lens drive wire [B].
4. Remove the upper rear cover (2 screws).
5. Open the front cover.
6. Open the upper unit by pushing the release lever.
7. Disconnect the lens motor 6P connector [C].
8. Close the upper unit.
9. Remove the lens motor bracket [D] (2 screws and 1 clamp).
10. Remove the motor [E] from the bracket (2 screws), and replace the motor.
11. Reassemble.
[D]
5-22
24 June 1994
[D]
[E]
[B]