Relay Sensor And Registration Sensor Replacement - Ricoh Robin Service Manual

PAPER FEED
5.3 RELAY SENSOR AND REGISTRATION SENSOR
REPLACEMENT
[A]
[C]
1. Turn off the main switch.
2. Open the front cover.
3. Open the upper unit by pushing the release lever.
4. Remove the harness cover [A] (2 screws).
5. Remove the by-pass feed table [B] (1 screw and 1 shoulder screw).
6. Remove the relay sensor connector [C].
7. Remove the relay roller guide plate [D] as shown (2 screws).
[D]
5-38
24 June 1994
[B]