Optional Equipment Installation - Ricoh Robin Service Manual

OTHERS

9.3 OPTIONAL EQUIPMENT INSTALLATION

9.3.1 Optics Anti-condensation Heater Installation
1. Turn off the main switch.
2. Remove the upper rear cover (2 screws).
3. Remove the exposure glass. (See Exposure Glass Removal.)
4. Install the optics heater [A] in the optics cavity as shown (2 screws).
5. Wire the heater harness [B] and connect the connector [C] as shown.
[A]
5-90
24 June 1994
[B]
[C]