Ricoh Robin Service Manual page 166

24 June 1994
8. Remove the registration clutch [A] (1 E-ring).
9. Remove the relay roller clutch [B] (1 allen screw).
10. Remove the clutch stopper [C] (1 screw).
11. Remove the timing belt tightener [D] (1 spring [E]).
12. Remove two screws [F] securing the 1st paper feed unit.
13. Remove the E-ring [G] securing the paper feed clutch [H].
14. Remove the paper feed clutch while slightly lifting the 1st paper feed unit.
NOTE: When reinstalling the clutches, make sure that the clutch stoppers
lock the clutches.
[A]
[B]
[C]
5-41
PAPER FEED
[F]
[D]
[E]
[G]
[H]