Ricoh Robin Service Manual page 190

24 June 1994
[A]
[E]
[B]
[F]
13. Reassemble.
NOTE: 1) When reinstalling the fusing unit [A], make sure that the two
positioning pins [B] and the positioning screw [C] fit through
the two notches [D] and the hole [E] in the fusing frame.
2) When closing the upper unit, make sure that the torsion bars
[F] are positioned on the front [G] and rear [H] brackets as
shown.
[B]
[D]
[C]
[G]
5-65
FUSING
[F]
[H]