Operation; Introduction Of Display Panel - Santak C1K Manual

4

Operation

4. 1

Introduction of Display Panel

：
3# Load/battery capacity indicator
：
2# Load/battery capacity indicator
：
8# Utility power indicator
1. ON/OFF button:
The ON/OFF button provides the following functions:
1) Turn on UPS system:
By pressing the ON/OFF button more than 1 second, the UPS system is
turned on.
2) Turn off UPS system:
By pressing this button more than 1 second turns off the UPS system when-
ever the UPS run under the normal mode/battery mode.
2. Function button
The Function button provides the following functions:
1) Battery self-diagnosis
When the UPS ran in normal mode, pressing the button for more than 2
seconds can start the battery self-diagnosis.
2) Silence function in battery mode
In battery mode, when the buzzer beeps, pressing and holding the function
button for more than 2 seconds can silence the buzzer. Press the button for
more than 2 seconds again to resume the alarm function
Note: The alarm silencing function of the Function button is valid only in battery
：
1# Fault indicator
mode, and invalid for any other UPS alarm.
12
：
4# Load/battery capacity indicator
：
5# Load/battery capacity indicator
：
6# Load/battery capacity indicator
：
7# Bypass indicator
：
9# Inverter indicator
：
10# Battery indicator