Cable Connection; Connecting Input And Output Cables - Santak C1K Manual

3 Installation
3. 3

Cable Connection

3.3.1 Connecting Input and Output Cables

1. Input cable connection
2. Output cable connection
If the UPS is connected via the power cable, please use a proper socket
with protection against electric current, and pay attention to the capacity
of the socket: over 10A for C1K(S) , over 16A for C2K(S) and C3K(S). The
wiring configuration is shown in the following diagram.
Figure 3-1 Connection Method of Input for C1K(S)～C3K(S)
Table 3-2 Output way of UPS
Rating Model
1kVA C1K/ C1KS
2kVA C2K/ C2KS
3kVA C3K/ C3KS
The output of C1K(S)/ C2K(S)/ C3K(S) all available to uses sockets. The
total output power shall not exceed 1kVA/0.8kW, 2kVA/1.6 kW， 3kVA/2.
4 kW. Simply plug the load power cable to the output sockets of UPS to
complete connection as shown in the following diagram.
Quantity of output
Output Terminal Block
socket
2
4
3
7
Nil
Nil
Available