Connecting Communication Cable - Santak C1K Manual

3 Installation
4.Connect the plug of the external battery cable to the external battery socket
on the rear panel of the UPS to complete the connection procedure.
Figure 3-4 Battery connection diagram for Long Backup time models
Note ： The length of the external battery cable is normal, If users need a longer
one, please consult the distributor. There is a limit to the length of the
external battery cable to ensure normal operation of the UPS.

3.3.3 Connecting Communication Cable

1. Computer interface
Computer Interface
Computer
Communication cable
computer interface: The type of signals, serial command (RS232), is provided by
the UPS to communicate with a host computer. User can use
WinPower software(download from the web of santak) to
monitor the UPS through the port.
10