Santak C1K Manual page 4

A. Remove watches, rings, or other metal object from the hands;
B. Use tools with insulated handles;
C. Wear rubber gloves and boots;
D. Do not lay tools or metal parts on top of batteries;
E. Disconnect the load before operate the terminal of battery.
5. Do not dispose of batteries in a fire as they may explode.
6. Do not open or mutilate the battery. It may cause an electrolyte leakage that is toxic and
harmful to the skin and eyes. If electrolyte comes into contact with the skin, wash the affected
area with plenty of clean water immediately and go to the hospital for a check.
7. Do not make the positive and negative terminals of the battery short circuit; otherwise it may
cause electric shock or fire.
Maintenance
1. The operating environment and storage method are two main factors affecting the lifetime
and reliability of the UPS. Hence, it is advisable not use the device in the following environments:
Where the temperature and relative humidity are outside the specifications (temperature:
●
0℃～40℃, relative humidity: 20%～90%.
Where vibrations or shocks are existing.
●
Dust, corrosive agents or salts or inflammable gas are present.
●
2. If the UPS will remain idle for a long period, it must be stored in a dry environment. The
storage temperature should range between － 25℃～＋ 55℃ (without battery). Make the am-
bient temperature over 0℃ and keep a period of time before power on the UPS.