Sending Audio/Video From The External Equipment To A Remote Party - Sony PCS-G70 Operating Instructions Manual

Sending Audio/Video from the External
Equipment to a Remote Party
The Communication Terminal allows you to send the picture and sound output
from the connected equipment such as a VCR to the remote party.
To connect the video equipment for input
The Communication Terminal is equipped with two video inputs.
VCR, etc.
to video
output
VCR, etc.
to S-video
output
Note
Be sure to connect the audio cable to either of two VCRs.
To input audio/video from external equipment
To input video
Open the Video Input Select menu by pressing the VIDEO INPUT SELECT
button on the Remote Commander, then select the desired video input from the
"Near" text box in the menu.
To input the video from the equipment connected to the MAIN AUX IN or
SUB AUX IN jack, choose "AUX 1" or "AUX 2", respectively.
134

Sending Audio/Video from the External Equipment to a Remote Party

to audio
Audio cable (not supplied)
output
Video cable (not supplied)
S-video cable (not supplied)
TERMINAL VISCA OUT
MCU VIDEO OUT AUDIO OUT AUDIO IN MAIN
(MIXED) AUX LINE CAMERA AUX IN
MIC
(PLUG IN POWER)
1 2
1 2 3 4 5
WHITE 100BASE-TX/
DC 19.5V 1 2
IR OUT EC-MIC BOARD 10BASE-T
AUX CONTROL RGB OUT
1 2 CTRL-S 1 2
AUX MONITOR
VIDEO OUT
to
MAIN
to AUDIO IN
AUX
IN
Video
conversion cable
(supplied)
SUB
CAMERA AUX IN
DSB
ISDN UNIT
to
SUB
AUX
IN