Activating Extended Information Level - Samson TROVIS 5573 Mounting And Operating Instructions

2.8 Activating extended information level

After activating the extended information level, the following information can be read after
the listed data points:
− Capacity
·
− Flow rate V
− Public holidays
− Vacations (can be changed, see section 2.8.2)
− Valve positions
− Switching states of the binary inputs
− InFo 2: After confirmation [Û] the following values are shown one after the other:
Opening the extended information level
1. Turn the rotary switch to
Reading: 0 0 0 0,
2. Enter key number 1999 [q].
3. Confirm key number [Û].
Reading: 0 0 0 0
4. Turn the rotary switch back to normal switch position
Note
− The additional information is hidden when the key number 1999 is entered again.
− The key number 1999 cannot be used to change the controller configuration and
parameterization. A separate key number exists for configuration and parameterization
(see section 3).
EB 5573 EN
(can be changed, see section 2.8.1)
Controller ID
Memory left in data logging module (see
section 10.3)
255
Operating hours of solar circuit pump (see
section 7.4)
(parameter and configuration level).
blinks.
(information level).
Operation
17