Activating Extended Operating Level - Samson TROVIS 5579 Mounting And Operating Instructions

Automation system trovis 5500. heating and district heating controller
Table of Contents

Advertisement

Operation
1.8

Activating extended operating level

After the key number 1999 has been entered, the following information can be viewed and
edited after the data points listed in section 1.4 have been displayed:
4
Heat capacity
4
Flow rate
4
Public holidays
4
Vacation periods
4
Valve positions
4
Modem status information
4
Meter bus status information
4
Switching states of the binary inputs
4
Info 2 · The following data appears in the sequence shown below:
Opening the extended operating level:
Switch to configuration and parameter level.
Display shows: 0 0 0 0
q
Set key number 1999.
Confirm key number.
Display shows: time
Note: The additional information is hidden when the key number 1999 is entered again.
16
EB 5579 EN
(can be changed)
(can be changed)
Controller ID (refer to section 8.6)
Memory capacity of data logging module (section 9.6)
Modbus station address (refer to section 9.3)
Operating hours of solar circuit pump (refer to section 6.4)
Water flowmeter (refer to section 6.3)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents