Module Connectors And Signal Rails; Module Connectors; Signal Rails, J25 And J26 - Digi ConnectCore Hardware Reference Manual

About the development board

Module connectors and signal rails

Module connectors

See the Module pinout

Signal rails, J25 and J26

The development board provides two 2x80 pin signal rails, J25 and J26. These connectors provide
most of the signals available on the module connectors and can be used for measurement or
development purposes.
J25 corresponds to module connector J1
n
J26 corresponds to module connector J2
n
ConnectCore for i.MX51 Hardware Reference Manual
for related information.
Module connectors and signal rails
97