Poe Module Connectors - Ieee802.3Af - Digi ConnectCore 9P 9215 Hardware Reference Manual

C h a p t e r 2
Pin
7
9
11
13
15
17
19
P o E m o d u l e c o n n e c t o r s - I E E E 8 0 2 . 3 a f
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The development board has two PoE module connectors, X9 and X26. The PoE
module is an optional accessory item that can be plugged on the development board
through the two connectors:
Note: The PoE interface is only available for the ConnectCore 9P 9215 module.
ConnectCore 9P 9215 and Wi-9P 9215 Hardware Reference
58
Signal
TMS
TCK
RTCK (optional)
TDO
SRESET#
No connect
No connect
X9, input connector: Provides access to the
Ethernet interface.
X26, output connector: Provides the output power supply from the PoE module.
Pin Signal
8 GND
10 GND
12 GND
14 GND
16 GND
18 GND
20 GND
PoE signals coming from the