Ethernet - Digi ConnectCore Hardware Reference Manual

Revision history—90001128
Revision Date
M May, 2014
N November,
2014
P June, 2017 Updated branding and added statements for RED compliance.
R April, 2018
S January,
2019
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2019 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)
Logs (from time of reported issue)
Trace (if possible)
Description of issue
Steps to reproduce
ConnectCore for i.MX51 Hardware Reference Manual
Description
Correct inaccuracy and sharpen clarity on the high temp start up issue.
Miscellaneous editorial updates. Updated the voltages for the table in Coin
cell input (VCC_COINCELL). Added a table of related publications.
Added coin cell input topic.
Added backdrive caution.
2