Poe Module Connectors - Ieee802.3Af - Digi ConnectCore Wi-9P 9215 Hardware Reference Manual

P o E m o d u l e c o n n e c t o r s - I E E E 8 0 2 . 3 a f
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Development Board has two PoE module connectors, X9 and X26. The PoE
module is an optional accessory item that can be plugged on the Development
Board through two connectors:


Note:
Power Jack,
X24
www.digiembedded.com
X9, input connector: Provides access to the
Ethernet interface.
X26, output connector: Provides the output power supply from the PoE module.
The PoE interface is only available for the ConnectCore 9P 9215 module.
ConnectCore 9P 9215 Development Board
PoE signals coming from the
PoE Header, X26
PoE
Header,
X9
84