Installing The Touch Panel - Christie CineLife+ RGB PLF CP4450-RGB Installation And Setup Manual

Installing the touch panel

The touch panel controls projector functions and provides quick access to projector information.
The touch panel can be mounted on the rear panel or either side of the projector.
1. Remove the touch panel and the mounting arm from their packaging.
2. Attach one end of the touch panel mounting arm over the ball joint on the rear of the touch
panel.
A Mounting arm
B Ball joint
3. While supporting the touch panel, fit the other end of the touch panel mounting arm over the
ball joint on the rear panel of the projector.
CineLife+ RGB PLF Installation and Setup Guide–CP4450-RGB
020-103072-02 Rev. 1 (09-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installing and setting up
28