Christie CineLife+ RGB PLF CP4450-RGB Installation And Setup Manual page 33

3. Connect the L, N, and PE harness connectors to the corresponding terminals.
4. Tighten the screws at each terminal.
5. Route the power cable through the slot provided on the terminal block cover. To avoid pinching
the power cable, ensure the cable and rubber grommet are placed inside the cover cutout.
CineLife+ RGB PLF Installation and Setup Guide–CP4450-RGB
020-103072-02 Rev. 1 (09-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installing and setting up
33