Projector Led Status Indicators - Christie CineLife+ RGB PLF CP4450-RGB Installation And Setup Manual

B Christie Link port.
C Software Defined Video over Ethernet (SDVoE) port.
D USB-C port. Connects the projector touch panel.
E USB port.
F Ethernet port. Connects to the local network and can send CineLife+ serial commands.
G Marriage status LED indicator. In full power mode, a green LED indicates that the projector is properly
married and encrypted content can be displayed. A red LED indicates marriage is broken and
encrypted content cannot be displayed.
H Fire alarm connector.
I RS-232 communication port.
J GPIO port. Connects the projector to external automation or automation devices.
K Connects the projector to 3D devices.

Projector LED status indicators

Identify the LED state colors and meaning.
LEDs
Green: Flashes once per second
Yellow: Off
Red: Off
Green: Flashes three times per second
Yellow: Off
Red: Off
Green: Solid
Yellow: Off
Red: Off
Green: Solid
Yellow: Flashes once per second
Red: Off
Green: Solid
Yellow: Flashes three times per second
Red: Off
Green: Off
Yellow: Off
Red: Flashes three times per second
Green: Off
Yellow: Off
Red: Solid
CineLife+ RGB PLF Installation and Setup Guide–CP4450-RGB
020-103072-02 Rev. 1 (09-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices to the projector and establishing communication
Description
Standby mode
Warm up
The power is on, and the lamp is on or off
Notification
Non-critical alarm
Unacknowledged critical error
Acknowledged critical error
42