Error Messages - Brother ADS-1000W Service Manual

3.2

Error Messages

The error messages displayed on the status monitor and their description are shown in the table
below.
Error Message
Cover is Open
Document Jam
Other Error
Out of Memory
Replace Pad
Replace Parts
Replace Roller
Unable to Scan
USB Access Error
USB Write-protected
Description
The front cover sensor detected an open front cover.
The document scanning position sensor detected
document jam or card jam.
The USB device connected to the machine may be
broken.
The USB device connected to the machine is not
supported.
An USB hub is connected.
Overcurrent has been detected in the USB terminal.
There is insufficient memory.
Use of the separation pad ASSY has reached the
upper limit.
Use of the separation pad ASSY and pick-up roller has
reached the upper limit.
Use of the pick-up roller has reached the upper limit.
An error occurred during scanning.
USB flash memory drive was disconnected during
accessing it.
USB flash memory drive capacity has reached the limit
during writing.
The USB flash memory drive connected to the
machine is blocked from writing.
2-11
Refer to:
4.1.8
4.1.6
4.3.3
4.3.4
4.1.7
4.1.3
4.1.4
4.1.9
4.1.9
4.1.9
4.1.14
4.1.3
4.1.4
4.7.3
4.7.3
Confidential