Brother ADS-1000W Service Manual page 32

Error display
When all LEDs except the
according to the error cause. See the table below for those displays.
Error display
Type of problem
A card was set when the top cover was open.
No device with WPS or AOSS feature found on device
search for wireless LAN setting.
An error occurred in wireless LAN connection.
Multiple devices with AP for WPS/PBC mode, or in AOSS
mode found on wireless LAN connection.
LED are flashing, you can switch displays by pressing the
After pressing the
key
2-9
Type of problem
First or second side CIS unit ID
mounted on the machine does not
match with the one on EEPROM.
Color parameter in the EEPROM
does not match the first side or
second side CIS unit.
Refer to:
4.1.11
4.1.12
4.1.5
4.1.13
key
Refer to:
4.1.14
4.1.14
Confidential