Restoring The Machine Information - Brother ADS-1000W Service Manual

1.6

Restoring the Machine Information

This function is used to restore information including machine information and user settings
backed up in USB flash memory drive before disassembly.
If you succeeded in restoring, procedure 1.5 to 1.7 are not required.
(1) Press and hold the
state. LEDs except WiFi LED light.
(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The
to USB, Error,
(3) Connect the USB flash memory drive with back up data to the machine.
(4) Press the [to Network Device2] key eight times. The to PC LED lights.
(5) Press the
(6) Press the [to Network Device1] key. The machine information is stored in EEPRPOM of the
machine, then the to PC, to USB, to Network Device1, and
Note:
• Do not disconnect the USB flash memory drive until
may write faulty data when the USB flash memory drive is disconnected during the
process.
(7) Press the
Disconnect the USB flash memory drive.
(8) Press the [to Network Device1] key, and then [to Network Device2] key three times. The to
PC, to USB, and to Network Device2 LEDs light.
(9) Press the
Note:
• When the machine information is successfully restored, perform (8) and (9) to quit
the maintenance mode, and restart the machine. If you don't restart the machine,
we cannot ensure its normal operation.
key for five seconds or longer when the machine is in the ready
, and LEDs light and the machine enters the maintenance mode.
key. The to PC, to USB, to Network Device1, and
key, and the machine returns to the initial state of maintenance mode.
key. The machine returns to the ready state.
LED light. The machine
4-5
LEDs light.
LEDs light.
Confidential