Cover Switch Assy - Brother ADS-1000W Service Manual

8.21 Cover switch ASSY

(1) Remove the two taptite bind B M3x8 screws to remove the front cover sensor earth wire,
gear hold plate earth wire, and gear hold plate from the machine.
Note:
• Be careful not to lose gears.
(2) Release the top cover sensor harness and front cover sensor harness from the securing
fixtures.
(3) Remove the taptite bind B M3x8 screw to remove the cover switch ASSY from the
machine.
HARNESS ROUTING: Refer to
Gear hold plate
Gear hold plate earth wire
Fig.3-31
"5. Frame R"
3-35
Cover switch ASSY
Top cover sensor harness /
Front cover sensor harness
Front cover sensor
earth wire
Taptite bind B M3x8
and "8. Lower chute".
Taptite bind B M3x8
Confidential