Backup Machine Information - Brother ADS-1000W Service Manual

1.3.8 Backup machine information

<Function>
This function is used to store backups including machine information and user setting to USB
flash memory drive and restores those backup data later if necessary.
<Operating Procedure>
 Backup
(1) Create a folder in the top hierarchy of USB flash memory drive and name it "Brother".
(2) Connect an USB flash memory drive to the machine at the initial state of maintenance
mode.
(3) Press the [to Network Device2] key, and check that all LEDs go out.
(4) Press the [to Network Device2] key eight times. The to PC LED lights.
(5) Press the
(6) Press the [to PC] key. The machine information and user setting are backed up to USB
flash memory drive, and then the to PC, to USB, to Network Device1, and
(7) Press the
Disconnect the USB flash memory drive.
 Restoration
(1) Connect the USB flash memory drive with back up data to the machine in the initial state of
maintenance mode.
(2) Press the [to Network Device2] key eight times. The to PC LED lights.
(3) Press the
(4) To restore all backup data, press the [to Network Device1] key.
To restore user setting only, Press the [to USB] key.
The backup data is stored in EEPROM of the machine, then the to PC, to USB, to Network
Device1, and
Note:
• Do not disconnect the USB flash memory drive until
may write faulty data when the USB flash memory drive is disconnected during the
process.
(5) Press the
Disconnect the USB flash memory drive.
(6) Press the [to Network Device1] key, and then [to Network Device2] key three times. The to
PC, to USB, and to Network Device2 LEDs light.
(7) Press the
Note:
• When the machine information is successfully restored, perform (6) and (7) to quit
the maintenance mode, and restart the machine. If you do not restart the machine,
we cannot ensure its normal operation.
key. The to PC, to USB, to Network Device1, and
key, and the machine returns to the initial state of maintenance mode.
key. The to PC, to USB, to Network Device1, and
LEDs light.
key, and the machine returns to the initial state of maintenance mode.
key. The machine returns to the ready state.
LED lights. The machine
5-6
LEDs light.
LEDs light.
LEDs light.
Confidential