Error Indications; Led Display When An Error Occurs - Brother ADS-1000W Service Manual

3.

ERROR INDICATIONS

3.1

LED Display when an Error Occurs

Determine the message details according to the LED display on the control panel. Refer to the
page shown in the "Refer to:" column in the table below to take appropriate measures.
Most errors are automatically cleared after measures are taken. If not automatically cleared,
press the key. If the error is still not cleared, turn OFF the machine.
LED status in the table below:
Error display
Unlit Lit
Type of problem
All scanned data are printed as blank page.
The machine and USB cable were not connected when "to
PC" was executed.
Or wireless LAN was not connected when "to PC", "to
FTP", or "to WS SCAN" was executed.
There was insufficient memory in the machine when "to
PC" was executed.
There was insufficient space in the connected USB flash
memory drive when "to USB" was executed.
Numbers of files and folders stored in the USB flash
memory drive exceeded the upper limit when "to USB"
was executed.
Sequential number of files and folders stored in the USB
flash memory drive exceeded the upper limit when "to
USB" was executed.
2-6
Flashing
Refer to:
4.1.1
4.1.2
4.1.3
4.1.4
4.1.4
4.1.4
Confidential