The Country Code Was Not Entered Correctly; Status Error Messages - Brother ADS-2000 Service Manual

3.2

Status Error Messages

Error message
Cover is Open
Document Jam
Machine Error F9
Multifeed
Out of Memory
Replace Pad
Replace Parts
Replace Roller
Scan Unable 3B
Scan Unable A7
Scan Unable A9
Scan Unable E0
Scan Unable E1
Scan Unable E6
Scanner Error B0
Scanner Error B8
Scanner Error B9
Scanner Error BB
Scanner Error BD
Unusable Device
Description
The front cover sensor detected an open front cover.
The document scanning position sensor detected that
the document length was 40 cm or more.
The document scanning position sensor has not
detected the top of the document even after the
document has been fed for the specified distance.

The country code was not entered correctly.

The double feeding sensor detected multiple
documents.
The scanned data has exceeded the built-in memory
capacity.
The page counter for the separation pad has reached
the limit.
The page counters for both the separation pad and the
pick-up roller have reached the limit.
The page counter for the pick-up roller has reached the
limit.
An error occurred during access to the DRAM in the
main PCB ASSY.
Color parameter in the ROM does not match the first
side or second side CIS unit.
A scanning error occurred while scanning the image.
An error occurred in the ROM checksum.
Program error
Write error in the EEPROM of the main PCB
The first side or second side CIS flat cable is not
connected correctly.(This problem occurs only in
maintenance mode.)
The voltage value was below the lower limit during
scanning.
The white level does not increase during scanning
although the light intensity was increased.
A white level not within the standard was scanned
when the maintenance mode function "Acquire white
level data and set CIS scan area" was executed.
A black level not within the standard was scanned
when the maintenance mode function "Acquire white
level data and set CIS scan area" was executed.
A USB device not within the specifications is connected
to the USB terminal, resulting in overcurrent.
2-13
Error Refer
codes to:
A4 2-16
A2 2-14
A3 2-14
F9 2-15
AB 2-14
C7 2-15
- 2-16
- 2-16
- 2-16
3B 2-15
A7 2-16
A9 2-16
E0 2-15
E1 2-15
E6 2-15
B0 2-15
B8 2-16
B9 2-16
BB 2-16
BD 2-16
CA 2-15
Confidential