First Side Cis Flat Cable - Brother ADS-1000W Service Manual

8.22 First side CIS flat cable

(1) Turn the machine upside down.
(2) Remove the taptite bind B M3x8 screw while peeling the PCB upper insulation film F, and
remove the main motor earth plate from the machine.
(3) Remove the taptite bind B M3x8 screw while peeling the PCB upper insulation film F, and
remove the main PCB holder from the machine. Release the main motor harness ASSY
from the guide of the harness protect cover.
(4) Disconnect the first side CIS flat cable from the machine.
Main motor earth plate
Harness protect cover
Guide
Main motor harness ASSY
HARNESS ROUTING: Refer to
Taptite bind B M3x8
PCB upper insulation film F
Fig.3-32
"6. Frame L" and "8. Lower
3-36
Taptite bind B M3x8
Main PCB holder
First side CIS flat cable
chute".
Confidential