Status Error Messages - Brother ADS-3000N Service Manual

3.2

Status Error Messages

LCD
Check Connection
Document Jam/too
Long
Insufficient USB
Storage
Multifeed
Out of Memory
PC List is empty.
Registration Failed Email address has more than 64 characters.
Replace Reverse
Roller
Replace pick up
Roller
Replace pick up
and reverse roller
Too Many Files on
USB
Unusable Device
Unable to Scan XX A scanning error occurred while scanning the image.
Unusable USB
Device
USB Access Error
USB Hub Not
Supported
USB Write-
protected
Connection error between the machine and PC occurred when
the "to PC" was executed.
A document jam occurred.
The document scanning position sensor detected that the
document was longer than 5 m.
The data has exceeded the USB flash memory capacity when
using USB.
The multi feeding sensor detected multiple documents.
The scanned data has exceeded the built-in memory capacity.
The machine was not connected with PC when the "to PC" was
executed.
The number of email addresses has exceeded the specified
amount.
The page counter for the reverse roller has reached the limit.
The page counter for the pick up roller has reached the limit.
The page counter for the reverse roller and pick up roller have
reached the limit.
The number of files or folders has exceeded the upper limit
when using USB.
A non-supported non-USB device is connected to the USB
terminal.
A non-supported USB device is connected to the USB terminal.
An USB device not within the specification is connected to the
USB terminal, resulting in overcurrent.
An USB device with a built-in hub is connected to the USB
terminal.
USB flash memory was protected when the USB was used.
2-11
Description
Refer
to:
4.1.19
4.1.7
4.1.8
4.1.2
4.1.9
4.1.5
4.1.19
4.1.18
4.1.11
4.1.11
4.1.11
4.1.2
4.1.15
-
4.1.15
4.1.15
4.1.15
4.7.3
Confidential