Quit Maintenance Mode - Brother ADS-1000W Service Manual

LED
• When the firmware is installed, "mfu-send.log" file will be created in the "Brother" folder.

1.3.11 Quit maintenance mode

<Function>
This function is used to quit maintenance mode.
<Operating Procedure>
(1) Press the [to Network Device1] key, and then [to Network Device2] key three times in the
initial state of maintenance mode. The to PC, to USB, and to Network Device2 LEDs light.
(2) Press the
File with extension "pjl" cannot be found.
Multiple files with extension "pjl" found.
Cannot open the file due to an error such as USB flash memory drive
failure.
key. The LED flashes and the machine returns to the ready state.
Description
5-9
Confidential