AT commands
T8 (D8 Output Timer)
Specifies how long pin
to configured value. If set to 0, there is no timeout.
Parameter range
0 - 0xFF
Default
0
T9 (D9 Output Timer)
Specifies how long pin
configured value. If set to 0, there is no timeout.
Parameter range
0 - 0xFF
Default
0
Q0 (P0 Output Timer)
Specifies how long pin P0 holds a given value before it reverts to configured value. If set to 0, there is
no timeout.
Parameter range
0 - 0xFF
Default
0
Q1 (P1 Output Timer)
Specifies how long pin P1 holds a given value before it reverts to configured value. If set to 0, there is
no timeout.
Parameter range
0 - 0xFF
Default
0
Q2 (P2 Output Timer)
Specifies how long pin P2 holds a given value before it reverts to configured value. If set to 0, there is
no timeout.
Parameter range
0 - 0xFF
Digi XBee® 3 802.15.4 RF Module User Guide
D8 (DIO8/DTR/SLP_Request Configuration)
D9 (DIO9/ON_SLEEP Configuration)
I/O line passing commands
holds a given value before it reverts
holds a given value before it reverts to
171