T0 (D0 Timeout Timer); T1 (D1 Output Timeout Timer); T2 (D2 Output Timeout Timer); T3 (D3 Output Timeout Timer) - Digi XBee 3802.15.4 User Manual

AT commands
Parameter range
0 - 1
Parameter
0
1
Default
1

T0 (D0 Timeout Timer)

Specifies how long pin
reverts to configured value. If set to 0, there is no timeout.
Parameter range
0 - 0xFF
Default
0

T1 (D1 Output Timeout Timer)

Specifies how long pin
reverts to configured value. If set to 0, there is no timeout.
Parameter range
0 - 0xFF
Default
0

T2 (D2 Output Timeout Timer)

Specifies how long pin
to configured value. If set to 0, there is no timeout.
Parameter range
0 - 0xFF
Default
0

T3 (D3 Output Timeout Timer)

Specifies how long pin
reverts to configured value. If set to 0, there is no timeout.
Digi XBee® 3 802.15.4 RF Module User Guide
Description
Disabled
Enabled
D0 (DIO0/ADC0/Commissioning Configuration)
D1 (DIO1/ADC1/TH_SPI_ATTN Configuration)
D2 (DIO2/ADC2/TH_SPI_CLK Configuration)
D3 (DIO3/ADC3/TH_SPI_SSEL Configuration)
I/O line passing commands
holds a given value before it
holds a given value before it
holds a given value before it reverts
holds a given value before it
169