Mcf Transfer - IBM 3745 Service Functions

MCF Transfer
MCF Transfer
You must use this procedure when you receive the MCF on diskette. This procedure transfers the MCF
from the diskette to the MOSS disk. You may then use the MCF upgrade procedure to install the corre-
sponding MCF.
• The MOSS must be offline or alone.
• The MOSS IML must have been made from
the disk.
1. You must be in the MCF function (see 7-5).
2. Enter 2 in
D.
3. Press SEND.
Screen
m
is displayed.
SELECT ONE OPTION
(I TO 3), ThEN PRESS SEND ==>
D
1 = MeF ~IANAGEMENT
(UPGRADE OR RESTORE MICqOC:OE, LIST, HISTORY TABLE)
MCF FILE COPY FRI»t DISKETTE TO DISK
3 = PATCH MANAGEMENT
Fl:END F3:ALARM
Figure 7-5. MCF/Patch Selection Screen
Install the second diskette, and press SEND as
indicated on the screen.
III
Screen
II
is displayed.
1. Check if the information displayed is correct
(diskette level higher than disk level).
2. If OK, press SEND (otherwise press FS).
3. If you press SEND, the MCF file is copied from
the diskette to the MOSS disk.
When the copy is successfully completed, this
message is displayed:
MCF FILE COPIED ON DISK
7 -6
3745 Service Functions
-
~10UNT
THE NEil DISKETTE THAT CONTAINS MCF FILE, THEN PRESS SEND
Fl :END F3:ALARM F6:QUIT
Figure 7-6. MCF File Copy Mount Diskette Screen
II
DISK INFORMATION
EC NUMBER: xxxxxxx
LAST MCF NUMBER:
xxx "XXX
LAST APPLIED MeF:
xxxxx,xx
DISKETTE INFORMATION
EC NUMBER: xxxXxxx
LAST MCF NUMBER:
x"xxxxx
- PLEASE CONFIRM (Y OR N), THEN PRESS SEND ==>
Fl :END F3:ALARM F6:QUIT
Figure 7-7. MCF File Copy Information Screen
I
~
(
Ij
I~
i:
I